Hangzhou Easy Technology CO.,LTD.

Showing 11 - 19 of 19, total 2 pages [First] [Previous] [Next] [Last]

fx05 emulator
Specification: FX05 Emulator
Detail: Product Technical Parameter: The injector cut-out Emulator cuts out and simulates the operation of the injectors when the vehicle is running on GAS, thereby preventing the check-engine indicator light from coming on and pos...

lpg changeover switch
Specification: LPG Changeover Switch
Detail: Product Technical Parameter: 1.E5-D series: Connecting to the Hall pressure gauge (power supply: 12V; transducer output: 0.3-4.5V); 2.Gas volume display: 5-18***; 3.Light P means working oil-use-state; 4.Light A means to...

k714 changeover switch
Specification: K714 Changeover Switch
Detail: Used on EG500 multipoint sequential conversion systems

cng reducer
Specification: CNG Reducer for CNG Multipoint Sequential Conversion kits
Detail: Product Technical Parameter: Max. inlet pressure: 220 bar Working pressure: 200 bar Outlet pressure: 2.0 bar Applicable capacity: 1.0L ~ 2.0L car Working temperature: -40¡æ ~ +120¡æ Max Flow: 33M3/H Opening pressure ...

a6 cng/lpg multipoint sequential conversion kits
Specification: A6 CNG/LPG multipoint sequential conversion kits
Detail: Product Technical Parameter: 1.Working Voltage: 8 ¡« 16V 2. Coil Resistance: ¡Ý 1 ¦¸ 3. Peak & Hold£ºpeak & hold 4. Cylinder Type: sequential Injection 3 / 4 cylinder 5. Input Signal: original injection petrol signal¡¢water...

a5 cng/lpg multipoint sequential conversion kits
Specification: A5 CNG/LPG multipoint sequential conversion kits
Detail: Product Technical Parameter: 1.Working Voltage: 8 ¡« 16V 2.Coil Resistance: 3 ¦¸ 3.Peak & Hold£ºpeak & hold 4.Cylinder Type: sequential Injection 3 or 4 cylinder 5.Input Signal: original injection petrol signal, oxygen ...

lpg evaporation(reducer)
Specification: LPG Reducer used on multipoint sequential conversion system
Detail: Product Technical Parameter: 1.Max. Inlet Pressure: 1.4 bar 2.Rated working pressure: 1.0 bar 3.Applicable capacity: 1.0L ~ 2.0L 4.Working Voltage: ¡ª40¡æ ~ 120¡æ

d01 emulator
Specification: D01 Emulator used on single point system
Detail: D01 Emulator is used on single point injeation system

2 in 1 emulator
Specification: 2 in 1 Emulator for Auto
Detail: Product Technical Parameter: 1. The 2 in 1 emulator can be used in 3/4 cylinder engine. 2. Working voltage: 12VDC 3. Should be installed in waterproof and high temperature prevention 4. Far away from ignition system and ...


Showing 11 - 19 of 19, total 2 pages [First] [Previous] [Next] [Last]
1 2